Category: Imports

Japanese laws regulate importing explosives and nuclear fuel material as  shown below.

Explosives

Any person who intends to import gunpowder shall obtain permission from the prefectural governor (Article 24.1 of Explosives Control Act), and shall notify the prefectural governor to that effect without delay after importation (Paragraph 3 of the same article).

In addition, after importation, the company is obliged to conduct stability tests and report the results to the prefectural governor (Article 36).

 

Nuclear Fuel Materials

The import of nuclear fuel materials is regulated as shown in the following table.

Act on the Regulation of Radioactive Isotopes	Radioisotope1 (Exceeding standard2)	・(1) Licensed radioisotope users and (2) notified dealers and notified leasing companies are allowed to import. ・When importing, a permit copy and documents proving sale/lease are required3.
	Radioisotope (Below Standard)	・(1) Companies notified of the use of radioisotopes and (2) companies notified of the sale/lease of radioisotopes are allowed to import. ・When importing, a copy of the certificate of use and documents proving the business of sale or lease are required.
Law Concerning the Regulation of Nuclear Source Materials, Nuclear Fuel Materials and Reactors	Nuclear fuel materials (Plutonium, uranium, thorium, and their compounds,)	・Import approval is required under the Foreign Exchange and Foreign Trade Law. ・For transporting nuclear fuel materials/materials contaminated by nuclear fuel materials, necessary safety measures must be taken in accordance with the Nuclear Regulation Law (Article 59, Section 1 of the Act). In addition,  you must obtain confirmation from the Nuclear Regulation Authority when it is particularly necessary to prevent disasters caused by contaminated materials and protect specific nuclear fuel materials (Paragraph 2 of the same Article, Article 48 of the Order). ・A person entrusted with storing nuclear fuel materials is required to take necessary security measures in accordance with technical standards(Article 60).
	Specific nuclear fuel materials (Plutonium, uranium-233, enriched uranium and its compounds)	・Import approval is required under the Foreign Exchange and Foreign Trade Law. ・When transporting, the person responsible for transporting the material must be identified, measures must be taken to ensure that the prescribed arrangements are concluded, and confirmation must be obtained from the Nuclear Regulatory Commission (Article 59.2).

¹ The term “radioisotopes” refers to “radiation-emitting isotopes, their compounds, and their contents (including those installed in equipment). The term “radioisotopes” refers to “radiation-emitting isotopes and their compounds and their contents (including those installed in equipment). However, it does not include “nuclear fuel materials” and “nuclear source materials” in the Atomic Energy Basic Law (see Article 1 of the Enforcement Order).
² The quantity of radiation-emitting isotopes is specified in the “Law Concerning the Determination of the Quantity, etc. of Radiation-Emitting Isotopes.
³ Input Note 12 No. 177.

---

Please contact us if you have any questions.

Importing petroleum into Japan is regulated by the Oil Stockpiling Law and the Law Concerning the Quality Assurance of Petroleum Products, as shown in the following table.

Oil Stockpiling Law	Petroleum (refers to crude oil and designated petroleum products/ gasoline/kerosene/diesel oil/heavy oil1)	・Business of petroleum import must be registered by the Minister of Economy, Trade and Industry (Article 16). ・Upon customs clearance, a copy of the Oil Importer Registration Notice must be submitted2. ・Oil importers are required to notify the volume of imports every month(Article 36).         ※Notification of petroleum refining business is required for petroleum refining (production of gasoline, kerosene, diesel oil, and heavy oil). Notification is required for oil sales above a certain scale. As for the transportation and storage of oil, it is necessary to pay attention to the standards for transportation of hazardous materials under the Fire Service Act.
	Petroleum gas (=gas consisting mainly of propane gas and butane gas and their liquefied products)	・Import business3 must notify the Minister of Economy, Trade and Industry in advance(Article 28). ・Importers are required to report monthly on the volume of imports (Article 36).
Law Concerning the Quality Assurance of Gasoline (Quality Assurance Law)	Volatile Oil4 (Gasoline for automobiles)	・Importers intending to sell or consume gasoline as fuel for motor vehicles, confirm that it conforms to the volatile oil standards (Article 17-4, Paragraph 1 of the Law). ・Importers shall notify without delay when they have imported gasoline for use as fuel for automobiles (Paragraph 4 of the same article).   ※Sales gas stations, etc. require registration as business (Law 3)5
	Diesel oil6 (Light oil for diesel vehicles)	・Importers intending to sell or consume diesel oil as fuel for motor vehicles, must confirm that it conforms to the diesel oil standard (Article 17-4, Paragraph 1 and Article 17-8, Paragraph 2). ・Importers shall notify without delay when they have imported diesel oil for use as fuel for automobiles (Article 17-4, Paragraph 4; Article 17-8, Paragraph 2).
	Kerosene7 (Kerosene for oil stoves）	・Importers intending to sell or consume kerosene as fuel for indoor combustion, must confirm that it conforms to the kerosene standard (Article 17-4, Paragraph 1 and Article 17-10, Paragraph 2). ・Importers shall submit a notification without delay when they import kerosene as fuel for indoor combustion (Article 17-4, Paragraph 4; Article 17-10, Paragraph 2).
	Heavy oil8 (Heavy oil thermal power generation, ships.)	・Importers intending to sell or consume heavy oil as fuel for ships must confirm that it conforms to the heavy oil standard (Article 17-4, Paragraph 1 and Article 17-12, Paragraph 2). ・Importers shall submit a notification without delay (Article 17-4, Paragraph 4 and Article 17-12, Paragraph 2).

¹ Gasoline has a boiling point (90% distillation temperature) of up to 180 degrees Celsius, and is used in automobiles. Kerosene has a boiling point of up to 270 degrees Celsius. And is used in oil stoves. Kerosene has a boiling point of up to 270 degrees Celsius and is used in oil stoves, etc. Diesel oil has a boiling point of up to 360 degrees Celsius and is used in diesel engines, etc. Heavy oil has a higher boiling point and is used for thermal power generation and ships.
² The basic tax law is listed in Table 1.
³ Excluding Japan Oil, Gas and Metals National Corporation.
⁴ Volatile oils have a boiling point (distillation temperature) up to 180°C.
⁵ Gas stations must also comply with the Law Concerning Reporting, etc. of Releases to the Environment of Specific Chemical Substances and Promoting Improvements in Their Management (PRTR Law) and ordinances (Tokyo Metropolitan Ordinance on Environmental Preservation, etc.).
⁶ Diesel oil has a boiling point of up to 360 degrees Celsius.
⁷ Kerosene has a boiling point of up to 270 degrees Celsius.
⁸ Heavy oil has a boiling point even higher than 360 degrees.

 

---

Please contact us if you have any questions.

1: General Information

Importing gas into Japan is regulated by the Gas Business Law, the Law Concerning the Maintenance of Storage and Proper Trade of Liquefied Petroleum Gas (“Liquefied Petroleum Gas Law”), and the High Pressure Gas Safety Law. 

In general, when people talk about gas in their homes, the two most commonly used gases are city gas, which is made from natural liquefied gas (LNG), and propane gas (LP gas).  The former is provided through underground conduits, while the latter is essentially provided through gas cylinders.

The pipeline type is regulated by the Gas Business Law, while the gas cylinder type is regulated by the Liquefied Petroleum Gas Law (and the High Pressure Gas Safety Law) in most cases.

	Natural gas	Propane gas (LP gas)
Main Use	City gas for household use Thermal power generation Natural gas station (truck)	Residential and commercial use Industrial use LP gas stations (cabs)
Ingredients	Methane is the main component, and natural gas (such as LNG) is the main raw material.	Mainly composed of propane and butane. Raw materials are imported mainly from the Middle East and produced domestically.
Characteristics	Lighter than air. Becomes liquid when cooled to -162°C.	Heavier than air. Becomes liquid when cooled to -42°C.
Supply method	Mainly through gas pipes ※Mostly in urban areas where gas pipes can be connected.	Mainly through gas cylinders

In addition, the High Pressure Gas Safety Act regulates oxygen gas, nitrogen gas, and other high-pressure gases for industrial use. Also, when storing or handling more than 300 kilograms of propane gas, a notification based on the Fire Service Act is required¹.

2: Gas Business Law

1 About the Gas Business Law

The Gas Business Law regulates the gas retail business, gas pipeline business, gas manufacturing business, and gas supply sales and import business. 

The term “gas retail business” here refers to the business of supplying gas through “pipelines,” which basically means the “city gas” business. On the other hand, “propane gas” is mainly supplied through gas cylinders, and unless there are special circumstances in which it is provided through “pipelines,” it does not fall under the category of “gas retail business” here.　　

In accordance with the Gas Business Law, registration is required for those operating a “gas retail business (Article 3 of the same law). In addition, those who operate a “gas pipeline business” are required to obtain a license (Article 35 of the same law) for a general gas pipeline business or a notification (Article 72 of the same law) for a specific gas pipeline business.

And for those who operate gas production business, notification is required (Article 86 of the same law). However, the “gas production business” refers to liquefied gas storage facilities with a total capacity of 200,000 kiloliters or more that are connected to “pipelines” used for the gas business (Article 2, Paragraph 9 of the Law, Article 5 of the Regulations), so it is understood that businesses that merely produce propane gas and fill cylinders do not fall under this category.

2 Import of Gas Equipment

Gas appliances regulated by the Gas Business Law refer to items (1) through (5) below. In each case, items for propane gas are not included.

	Item	explanation
1	Gas instant-boiler	Limited to those with a gas consumption of 70 kilowatts or less.
2	Gas Heater	Limited to gas consumptions of 19 kilowatts or less.
3	Bath tub with gas burner	Limited to those with a gas consumption of 21 kilowatts (91 kilowatts for those with a dedicated hot water supply unit) or less.
4	Gas Burner for Bath tub	Limited to gas consumptions of 21 kilowatts or less.
5	Gas Stove	Limited to those with a total gas consumption of 14 kilowatts or less and a gas consumption of 5.8 kilowatts or less per stove burner (21 kilowatts in the case of those with gas ovens).

 

A person engaged in the business of manufacturing, importing or selling gas appliances shall not sell or display (Article 138 of the same law) ² for sale gas appliances unless they bear the PSTG Mark³.

Therefore, manufacturers or importers of Gas Equipment are required to submit a notification (Article 140 of the same law), inspect the Gas Equipment they intend to handle to ensure that it complies with the standards for Gas Equipment (Appendix 3 of the Ministerial Ordinance on Technical Standards for Gas Equipment), and affix the PSTG Mark.

	Product Type	Inspection
Specific gas supplies	l   Semi-closed combustion gas instant water heater l   Semi-hermetic gas stove l   Semi-hermetic combustion l   bath tub with gas burner l   gas burner for hot tub	It is necessary to pass a conformity inspection by a registered inspection body. Self-inspection is insufficient.   Registered inspection organization Japan Gas Appliance Inspection Association
Others	l   Open-burning, closed-burning, or outdoor gas instantaneous water heaters l   Open-burning, closed-burning, or open-air gas stoves l   Closed-burning or open-air stoves with gas burners l   Gas stoves	It is necessary to pass a conformity inspection, but voluntary inspection is also acceptable.

Prepared with reference to the Ministry of Economy, Trade and Industry website.

3: Law Concerning Maintenance of Storage and Proper Trade of Liquefied Petroleum Gas

1 General Information

The “Act on Securing the Storage of and Proper Trade in Liquefied Petroleum Gas” regulates the business of selling liquefied petroleum gas, or LP gas (Liquified Petroleum Gas).

The scope of the “liquefied petroleum gas sales business” excludes the “gas retail business” and “general gas pipeline business” regulated by the Gas Business Law, so businesses “other than pipeline type” are assumed here. In short, “gas cylinder type” businesses are assumed here.

2 Obligations of Liquefied Petroleum Distributors

The law requires registration (Article 3) of “liquefied petroleum gas distributors,” and stipulates that these distributors are obligated to deliver documents at the time of contract (Article 14), have a chief engineer, comply with standards for storage facilities (Article 16), and provide safety services (Article 27).

In addition, the Law prohibits the sale of liquefied petroleum gas that does not conform to the standards set by the Ministry of Economy, Trade and Industry, which must be observed (Article 13 of the Law, Article 12 of the Regulations).

And the distributor is required to obtain a license for each storage facility or specified supply facility (Article 36 of the Law).

In addition to the above, the security equipment to be installed (gas detectors, automatic transmission equipment for gas shutdown, and gas supply shutdown equipment) must basically use equipment that has been certified (Article 35-6).

For more information, the High Pressure Gas Safety Institute of Japan’s “LP Gas Sales Business Guide” is easy to understand.

3 Manufacturers and importers of liquefied petroleum gas appliances

Liquefied petroleum gas appliances” cannot be sold in Japan without the PSLPG mark⁴.

Therefore, if a manufacturer or importer of liquefied petroleum gas appliances intends to sell liquefied petroleum gas appliances in Japan, it is necessary to notify the Ministry of Economy, Trade and Industry to that effect and have the appliances inspected for compliance with the standards (Appendix 3 of the “Ministerial Ordinance Concerning Technical Standards for Liquefied Petroleum Gas Appliances”) before affixing the PSLPG mark (Article 41, Article 46 of the same law).  In particular, in the case of “specified liquefied petroleum gas appliances” (see the following table)”, it is not sufficient to conduct a voluntary inspection, but must first undergo an inspection by a registered inspection agency (Article 47 of the Law).

 

	Product Type	Inspection	Indication
Specific liquefied petroleum gas appliances	l   Semi-hermetic instantaneous water heater l   Semi-hermetic stoves l   Semi-hermetic stove with burner l   Burner for bath tub l   Cartridge gas stove l   Bath tub with burner	Inspection by a registered inspection agency is required. Self-inspection is insufficient.   Registered Inspection Body Japan Gas Appliance Inspection Association
	Gas tap	Registered Inspection Body: Japan Gas Appliance Inspection Association Japan Gas Appliance Inspection Association Japan LPG Appliance Inspection Association
Other Petroleum appliances	Open, sealed, and outdoor instantaneous water heaters, open, sealed, and outdoor stoves, sealed and outdoor stoves with burners, general gas stoves	Inspection is required, but voluntary inspection is also acceptable.   Inspection organization: Japan Gas Appliance Inspection Association, or in-house inspection is also acceptable.
	Regulator, high pressure hose, low pressure hose, automatic gas shutoff against earthquake	Inspection organization: Japan LPG Appliance Inspection Association or inhouse inspections
	Gas leak sensor	Inspection organization: High Pressure Gas Safety Institute of Japan, or in-house inspection

Prepared with reference to the website of the Kanto Bureau of Economy, Trade and Industry, Ministry of Economy, Trade and Industry.

4: High Pressure Gas Safety Act

1 About the High-Pressure Gas Safety Act

Because of the potential for explosions, the High-Pressure Gas Safety Act regulates the manufacture, storage, sale, import, transfer, consumption, and disposal of high pressure gas.

2 Definition of high-pressure gas

The definition of “high pressure gas” is as follows: 1) compressed gas with a pressure of 1.0 MPa or higher⁵, and 2) liquefied gas with a pressure of 0.2 MPa or higher.

Even though helium and other gases in ordinary spray cans and balloons have a slightly higher pressure, they do not fall under the category of “high-pressure gas. Medical gases (oxygen) and industrial gases (acetylene, LP gas⁶) that are compressed under higher pressure fall under the category of high-pressure gases.

3 Manufacturing

A person who intends to manufacture high pressure gas using facilities where the volume of gas that can be manufactured (processed) is equal to or greater than the following standard values shall obtain a license as a Class 1 manufacturer (Article 3 of the same law).

Class 1 gases (helium/neon/argon/krypton/xenon/radon/ nitrogen/carbon dioxide/fluorocarbon/air)	300 sq. meters per day
Others	100 sq. meters per day

 All other manufacturers are required to submit a Class II manufacturer’s notification (Article 5, Paragraph 2 of the same law).

4 Importation of High-Pressure Gas

A person who has imported high pressure gas and its container shall not move it unless it has undergone an import inspection conducted by the prefectural governor and has been found to comply with the technical standards for import inspection (Article 22 of the same law).  However, there are certain exceptions⁷, such as when the product has passed an inspection by the High Pressure Gas Safety Institute of Japan or a designated import inspection organization and a notification has been submitted.

The technical standards for import inspection are to pass the content verification test and the safety level test for containers (Article 45-3 of the General High Pressure Gas Safety Regulations, Article 45-3 of the Liquefied Petroleum Gas Safety Regulations, Article 31-3 of the Refrigeration Safety Regulations).

For detailed information, please refer to the website of the Ministry of Economy, Trade and Industry and the website of the High Pressure Gas Safety Institute of Japan (Guide to High Pressure Gas Import Inspection, etc.).

5 Importation of Containers for High Pressure Gas

A person who has manufactured or imported a container for filling with high pressure gas shall not transfer or deliver the container unless it has undergone the prescribed inspection of the container by the Minister of Economy, Trade and Industry, the High Pressure Gas Association of Japan, or a person designated by the Minister of Economy, Trade and Industry, and has been stamped or marked as having passed the inspection (Article 44, Paragraph 1 of the same law)⁸.

6 Storage, Sales, and Transfer

A permit or notification is required for the storage of a large quantity of high pressure gas (Article 16 and 17-2), a notification is required for the sale or consumption of a large quantity (Article 20-4 and Article 24-2), and necessary measures for safety shall be taken when moving the gas (Article 23).

¹ Article 9-3 of the same law and Article 1-10, Paragraph 1, Item 3 of the Cabinet Order on the Control of Dangerous Goods.
² PSTG stands for “Product Safety of Town Gas Equipment and Appliances”.
³ However, there are certain exceptions, such as when the approval of the Minister of Economy, Trade and Industry is obtained.
⁴ PSLPG stands for ”Product Safety of Liquefied Petroleum Gas Equipment and Appliances”.
⁵ As for acetylene gas, a pressure of 0.2 MPa or higher falls under the category of high-pressure gas.
⁶ Liquefied petroleum gas (LP gas) is regulated by the High Pressure Gas Safety Act when used primarily for industrial purposes, and by the Liquefied Petroleum Gas Act when used primarily in homes.
⁷ See the proviso of the same article, Article 46 of the General High Pressure Gas Safety Regulations, and Article 45-4 of the Liquefied Petroleum Gas Safety Regulations.
⁸ For exceptions, see Article 44(2) of the Act and Article 5 of the Container Regulations.

---

Please contact us if you have any questions.

Consumer Product Safety Act

1 General Remarks

In order to ensure the safety of consumer products, the Consumer Product Safety Act establishes safety standards for certain products (“specified products”), requires products that comply with these standards to bear the PSC Mark, and prohibits the sale of products that do not bear the PSC Mark.

In addition, it stipulates certain products that require long-term maintenance (“specified maintenance products”), and it also stipulates reporting obligations in the event of a serious accident and recall obligations in the event of the discovery of a serious defect.

2 Regulations pertaining to the manufacture or import of specified products

A person who manufactures or imports a product of a specified product may not sell or display the product unless the person has submitted a notification of the business (Article 6 of the same law) and has obtained a “PSC Mark” to indicate that the product conforms to safety standard¹ (Article 4, paragraph 1 of the same law).

With regard to the method of obtaining the PSC mark, in the case of specified products, the importer must personally inspect² and pass the inspection to ensure that the imported product complies with the technical standards.  In addition, in the case of special specified products, it is not sufficient for importers to conduct their own inspection, but they must also pass a conformity inspection by a registered inspection body (Article 12, paragraph 1 and Article 13).

 

	Product Category	Products	Inspections	Signs
Specific Products	Specially Designated Products	Infant beds, portable laser application devices, hot water circulators for bathtubs, cigarette lighter	It is necessary to pass a conformity inspection by a registered inspection body. Self-inspection is not acceptable.
	Others	Pressure cookers for household use, helmets, climbing ropes, oil water heaters, oil bath tubs, oil heaters	Although it is necessary to pass a conformity inspection, but self- inspection is also acceptable.

 

3 Manufacture and import of specified maintenance products

The Consumer Product Safety Act designates certain products that are used for a long period of time and are highly likely to cause serious accidents due to age-related deterioration as “specified maintenance products” and imposes various obligations on manufacturers and importers of such products, including safety inspections, to ensure the safety of such products.

Special maintenance products

Indoor gas instantaneous water heaters (for city gas/propane gas), oil water heaters, indoor gas bath tubs (for city gas/propane gas), oil bath tubs, built-in electric dishwashers, FF-type oil hot-air heaters, electric bathroom dryers

 

A business operator that manufactures or imports specified maintenance products shall have the following obligations.

 (1) Obligation to notify the relevant business within 30 days of the start of business (Article 32-2 of the same law).

 (2) Obligation to indicate the legal description of the special maintenance products to be sold (Article 32-3 of the same law).

 (3) Obligation to attach to the product a document (“owner’s slip”) showing the basis for calculation of the design standard specification period and the arrangement of the inspection office (Article 32-4 of the same law).

 (4) An obligation to explain, at the time of delivery of the product to the consumer, (i) that there is a risk of danger in the use of the product due to age-related deterioration, (ii) that maintenance work such as inspections must be carried out to prevent danger, and (iii) an outline of the procedures for maintenance and inspection (Article 32-5 of the same law).

 (5) Obligation to inspect products in accordance with inspection standards³ (Article 32-15 of the same law).

 (6) Obligation to provide advance notice of inspections (Article 32-12 of the same law).

Household Goods Regulation Law

The “Law Concerning the Regulation of Household Products Containing Harmful Substances” (Household Goods Regulation Law) implements certain regulations to prevent health hazards caused by chemical substances contained in household products.

¹Refer to the technical standards in Appendix 1 of the “Ministerial Ordinance on Technical Standards, etc. for Specified Products Relating to the Ministry of Economy, Trade and Industry.
² The contents of the inspection must be recorded and preserved (Article 13 of the same law).
³ See Article 13 of the “Ministerial Ordinance on Specified Maintenance Products Relating to the Ministry of Economy, Trade and Industry” for inspection standards.

 

---

Please contact us if you have any questions.

Asbestos and asbestos-containing materials

The Occupational Safety and Health Law, which sets standards for the safety and health of workers, regulates asbestos and materials containing asbestos. Asbestos dust has caused mesothelioma and lung cancer in many workers.

In accordance with the Law, an import permit is required to import asbestos and asbestos-containing materials, and customs must obtain copies of import permits.

---

Please contact us if you have any questions.

This article contains information on importing electrical appliances and material into Japan. Relevant laws briefly covered in this overview include the Electrical Appliance and Material Safety Law, the Radio Law, the Public Management Law (Pachinko Machines).

General Information

 When importing electrical goods, a number of laws may be relevant:

• Electrical Appliance and Material Safety Law
• Consumer Product Safety Law
• Household Goods Control Law
• Household Goods Quality Labeling Law
• Industrial Standardization Law (JIS Law)
• Home Appliance Recycling Law
• Law for Promotion of Effective Utilization of Resources
• Energy Conservation Law
• Radio Law (wireless communication equipment)
• Telecommunications Business Law (Devices for communication terminal)
• Water Supply Law (water supply equipment)
• Entertainment Law (pachinko machines). 

In addition, the Food Sanitation Law (juicers, coffee makers) and the Pharmaceutical Affairs Law (medical devices such as electric massage machines may also be relevant.

Electrical Appliance and Material Safety Law

1 General Information

The Electrical Appliance and Material Safety Law regulates the manufacture, import, and sale of a wide range of electrical appliances and materials in order to ensure safety of these products.

2 Notification of Manufacturers and Importers

A manufacturer or importer of electrical appliances and materials must notify the Minister of Economy, Trade and Industry of its address and the type of electrical appliances and materials it handles within 30 days of commencement of business. In addition, foreign corporations that have not registered a branch office or a representative in Japan are not allowed to submit the notification.

3 Compliance with Safety Standards and PSE Mark

A manufacturer/importer of electrical appliances and materials shall comply with technical standards (Article 8, Paragraph 1).  Relevant standards are set forth in the “Ministerial Ordinance on the Technical Standards for Electrical Appliances and Materials”.

For specified electrical appliances and materials (electric pumps, vending machines, electric toys, etc.), a technical standards conformity inspection must be conducted by a registered inspection body and a certificate of conformity must be issued (Article 9 of the same law). In the case of other electrical appliances (electric kotatsu, electric refrigerator, electric razor, electric stand,), the inspection shall be conducted voluntarily, and the inspection records shall be prepared and stored (Article 8, paragraph 2).

Manufacturers and importers of electrical appliances and materials may display the PSE Mark on their electrical products if they have fulfilled the above obligations, while sales of electrical appliances and materials without the PSE Mark are prohibited (Article 27).

	Products	Inspections	Indication
Specified electrical appliance	・Electric water heaters ・Electric heating and electric toys ・Electric pumps ・Electric massagers ・Vending machines ・DC power supply equipment　 and more than 100 other items	It is necessary to pass a conformity inspection by a registered inspection body. Self-inspection is not sufficient.  As of the date of publication of this document, the registered inspection bodies include Intertec Japan K.K., TÜV Rheinland Japan K.K., the Research Institute of Electrical Safety and Environment, the Japan Quality Assurance Organization, and the Electric Wire Technical Center. For details, see the METI website.
Other Electrical Appliances	Electric kotatsu/electric kettle/ electric refrigerator/electric toothbrush/electric razor/incandescent lamp/electric stand/television receiver/audio equipment/lithium-ion storage battery and more than 300 other items	It is necessary to pass a conformity inspection, but inhouse inspection is also acceptable.

 

Note that smartphones and notebook computers are basically exempt from PSE as enumerated, but lithium-ion batteries and AC/DC adapters are subject to PSE, so it is easy to make a wrong judgment.

4 Long-term use of product safety indication system

For certain products (fans, air conditioners, electric washing machines and electric dehydrators, CRT televisions, ventilation fans) that often cause accidents due to aging and deterioration, labeling of standard use periods and precautions is mandatory.

Radio Law

1 About the Radio Law

Radio waves are used in various technologies such as smartphones, Wi-Fi (wireless LAN), radios, and drones, and the Radio Law regulates the use of radio waves.

Radio waves are limited in frequency, and radio waves of the same frequency interfere with each other, making it impossible to listen to the radio if an illegal wave is broadcast.

Therefore, technical standards and specifications for frequency distribution and management have been formulated, and a licensing system for the establishment of radio stations has been established.

2 What is a license under the Radio Law?

When establishing a radio station that transmits radio waves, it is necessary to obtain a “radio station” license (Same law 4 this article).

The term “radio station” may conjure up images of large-scale equipment, but cell phones, wireless microphones, transceivers also emit radio waves and thus fall under the category of radio equipment.

Therefore, the Radio Law states that if there is no or little risk of interference between radio waves, there is no need to obtain a license. Specifically, in the cases listed in the following table, no license is required.

1	Weak-wave wireless equipment	A license is not required if only equipment that emits extremely weak radio waves is used. Exceptions may be made for in-vehicle FM transmitters, wireless microphones, remote controls, car keyless entry, wireless headphones, radio-controlled devices, anti-shoplifting devices, and RFID devices.
2	Civil Radio Station	No license will be required for civil radio stations using radio equipment (limited to those with a technical compliance mark).
3	Low-power special-purpose radio stations (Low-power radio station)	A license is not required for radio stations using low-power radio equipment for certain applications (limited to those with a technical compliance mark).　 A wide variety of applications have been specified, including low-power security systems (home security, fire alarms), low-power data communication systems (wireless LAN, Bluetooth), and cordless phones.
4	Simplified radio station (Registered station)	For the following types, registration is considered to be sufficient instead of a license ・PHS radio station base stations (with an aerial power of 1 watt or less) and repeaters ・Premises radio stations (920 MHz band/2.4 GHz band) ・Base stations for radio access systems (5 GHz band) ・Digital simplex radio stations (350 MHz band)

Since the general public uses radio equipment (cell phones) without obtaining a license or registration, it is considered important for manufacturers/importers to make products with the “weak radio mark” (see (1)) or with the “technical conformity mark” [for low-power radio stations] (see (3)) if they want to make them widely available to the general public.

None of the exceptions in (1) through (4) above can be utilized for cell phones. For cell phones, the base station and the handset (corresponding to a land mobile station) are considered as a pair, and the cell phone operator is supposed to apply for a license for both, so the user does not need to apply for a license under the Radio Law.

3 Standard Certification System under the Radio Law

The Radio Law stipulates the technical standards specified in the Radio Law for a certain range of radio equipment, “Specified Radio Equipment”. to be used for small-scale radio stations, and a system has been established in which a person registered by the Minister of Internal Affairs and Communications (registered certification body) judges whether or not the equipment complies with the relevant standards.

The following table simplifies the licensing procedures for radio stations that use radio equipment bearing the technical conformity mark.

Translation of [Source: Japan Electronics and Information Technology Industries Association (JEITA) website.]

First, for specified low-power radio stations, Wi-Fi, Bluetooth, BLE, Zigbee, etc., no license or registration is required as long as the radio equipment with the technical compliance mark is used (Category 1 above; Article 38-2-2, Paragraph 1, Item 1 of the same law).

Second, in the case of cell phones, 5G, LTE and WCDMA handsets (“specified radio stations”), a comprehensive license can be obtained, eliminating the need for inspections of each individual radio installation (Category 2 above; Article 38-2-2, Paragraph 1, Item 2 of the same law). Taking cell phones as an example, it is not necessary for users to open their own radio stations to use cell phones, since telecommunication carriers, etc. have obtained a comprehensive license in advance on behalf of the actual users.

Third, in the case of base stations other than those mentioned above (radio buoys, on-premises radio), these devices can be used by eliminating the need for inspection when obtaining a license, or by substituting a simpler radio station registration for obtaining a license (Category 3 above; Article 38-2-2, Paragraph 1, Item 3 of the same law).

4 Obtaining the “Technical conformity mark” based on the Radio Law

Under the licensing and registration system mentioned in the previous section, most of the radio equipment in general use bears the mark of Technical Regulations Conformity Certification, the so-called “Technical Conformity Mark”. 

For example, the wireless LAN-compatible router (manufactured by NTT) for my personal use, has a technical compliance mark as shown below.

Ｔ　Certification Number：×××　××　××××　××× Ｒ　Certification Number：×××―××××××

 

The Ｒ mark is an indication of conformity to the technical standards (“Technical Regulations”) under the Radio Law.  It is often attached to things that generate radio waves such as wireless microphones, transceivers, cell phones, routers.

The Ｔ mark is an indication of compliance with technical standards under the Telecommunications Business Law.

It is often attached to terminals that connect to the facilities of a telecommunications carrier such as NTT’s communication facilities, (smartphones/old cell phones, analog phones, fax machines, and routers.

Basically, devices that do not have the technical compliance mark on them cannot be used in Japan. The same applies to imported foreign products, as it will explained in the next section.

The requirements and standards for obtaining the “technical conformity mark” are specified in the “Regulations Concerning Technical Regulations Conformity Certification of Specified Radio Equipment”.

In order to obtain the “technical conformity mark”, a conformity inspection to the technical standards by a registered certification body is required. However, there have been certain exceptions such as the special specified radio equipment.  If the contractor verifies the construction design by himself and confirms that it conforms to the technical standards, the contractor can be considered to have obtained the technical standards conformity certification. The “Technical conformity mark” can be obtained by submitting the prescribed notification to the Minister of Internal Affairs and Communications after self-confirmation (Article 38-33 of the same law).

For specific test methods, please refer to the website of the Ministry of Internal Affairs and Communications.

5 Regulations on imports

 In relation to imports, the Radio Law provides exceptions to imports of radio equipment.  First of all, in order to import “specified radio equipment” from overseas and use it in Japan without a license, it is necessary to obtain a technical standards conformity certification from a registered certification body and attach a technical conformity mark (Article 38-6 of the same law).  Even if a product already has an American FCC mark standard or an European EC mark standard affixed to it, it must be given a new Japanese technical compliance mark.

However, when importing products from countries that have concluded a Mutual Recognition Agreement (MRA), such as the U.S., Europe, and Singapore, if the product is certified by a certification body in these countries, it will be treated as having obtained a Technical Regulations Conformity Certification and can bear the Technical Regulations Conformity Mark.

 In addition, importers who import transceivers of foreign standards shall endeavor to avoid importing radio equipment that does not conform to technical standards specified in the Radio Law (Article 102-11, paragraph 1 of the same law). When a radio station using equipment that does not conform to such standards is likely to interfere with radios of other radio stations or cause serious adverse effects to their operations, the Ministry of Internal Affairs and Communications may issue recommendations and orders to take necessary measures (Article 102-11, Paragraph 2 and Paragraph 4 of the same law).

 

Public Management Law (Pachinko Machines)

The Entertainment Establishments Control Law does not specifically regulate the importation of pachinko machines. However, prefectural approval is required for the replacement of pachinko machines (Application mutatis mutandis of Article 9, paragraph 1 pursuant to Article 31-23 of the Act), and pachinko machines cannot be used for pachinko business unless they do not meet the standards set by the National Commission (Article 20, Paragraph 1 of the Law).

As a result, approval for machines to be installed in pachinko parlors cannot be granted unless the Public Safety Commission certifies that the machines in question do not meet the standards set by the National Commission, effectively making it impossible to install them.  Application procedures for certification are described in the “Regulations Concerning Certification and Model Approval of Amusement Machines”.  If the type has already been verified, this approval procedure will be simplified.

Therefore, as an importer, it is useful to apply for certification for pachinko machines (Article 20, Paragraph 4 of the Law) and obtain approval for the model of the machine to be imported before importing the machine.

 

———————————————————————————————————————–

Please contact us if you have any questions.

This article details the process of importing weapons such as firearms and sword. This is regulated by the Firearms and Swords Possession Control Law .

Firearms and Swords Possession Control Law 

The Firearms Control Law regulates the possession of swords*, guns, rifles, machine guns or artillery, gun cartridges, and gun parts (Article 3 to Article 3-6 of the Law).

Exceptions are:

• • •  When a “permit for possession” is obtained (Sections 4 and 6 of the Act); and
    • When a “firearms and swords registration certificate” is obtained for old-style firearms and swords of artistic value.

When importing unregistered old-style firearms or swords of artistic value from overseas, a “certificate of registration”.

Customs assumes that the product can be legally possessed after importation, so they will check the “possession permit”/”firearms and swords registration certificate”/”certificate of registration” or a copy of these in accordance with the Customs Law.

In addition, in relation to the Foreign Exchange and Foreign Trade Law, the import of swords, guns, gun cartridges, and gun parts requires import approval from the Minister of Economy, Trade and Industry.

* “Swords” means swords with a blade length of 15 cm or more, javelins and naginatas, swords with a blade length of 5.5 cm or more, daggers, and flying knives with a device that automatically opens the blade at 45 degrees or more (Article 2, Paragraph 2 of the Firearms Act).

---

Please contact us if you have any questions.

Importing chemicals into Japan is regulated by the following laws: the Chemical Substances Control Law, the Pollutant Release and Transfer Register Law (PRTR Law), and the Poisonous and Deleterious Substances Control Law.

 

The Chemical Substances Control Law

The import of chemical substances is regulated by the “Chemical Substance Control Law”, as shown in the following table.

New chemical substances	・In the case of imports, notification is basically required (Law 3). Upon receiving the notification, a safety assessment is conducted and the results are notified to the notifier (Law 4). ・Foreign manufacturers may also submit notifications of new chemical substances (Law 7).
General chemical substances	・Importers must submit a notification of the amount imported for each general chemical substance every fiscal year (Law 8).
Priority Assessment Chemical Substances8	・Importers must submit a notification of the import quantity for each priority assessment chemical substance every fiscal year (Law 9).
Monitored chemical substances	・Importers must submit a notification of the import quantity for each monitored chemical substance every fiscal year (Law 13).
Class 1 chemical substances	・Any person who intends to import shall obtain a permit. However, this shall not apply in the case of import for the purpose of testing and research (Same as the proviso).
Products using Class 1 chemical substances	Import is Prohibited (Law 24).
Class 2 chemical substances	・Notification is required. In case of importing more than the notified quantity, notification of change is required.
Products using Class 2 chemical substances	・Same as above.
Substances to be reported (Priority Assessment, Monitoring, Class II and General Chemical Substances)	・The importer shall report the results of the hazard investigation when it has been conducted and the hazard has been confirmed (Law 41).

If you would like to know more, please refer to the Ministry of Economy, Trade and Industry’s “What is the Chemical Substances Control Law?”

 

The Pollutant Release and Transfer Register Law (PRTR Law)        

In accordance with the Law Concerning Reporting of Releases to the Environment of Specific Chemical Substances and Promoting Improvements in Their Management, certain businesses are required to report the amount of Class I Designated Chemical Substances released into the environment and the amount transferred as waste (Article 5).

In addition, when a business operator provides a Class I Designated Chemical Substance, a Class II Designated Chemical Substance, and certain products containing these substances to another business operator, it is required to provide the other party with information on the chemical substance (Article 14). A Security Data Sheet (SDS) will be provided to provide this information.

Targeted businesses are defined according to the type of business, number of employees, and annual handling volume of target chemical substances. It should be noted that importers may also fall under the category of covered entities.

If you want to know more, you can refer to the Ministry of the Environment’s “PRTR Information Plaza” website.

 

The Poisonous and Deleterious Substances Control Law

1 Definition of Poisonous and Deleterious Substances

Among chemical substances, those with high toxicity are called poisons and those with low toxicity are called deleterious substances, and the scope of each is specified in Appended Table 1 and Appended Table 2 of the Poisonous and Deleterious Substances Control Law⁹.  the product is a drug or quasi-drug, it is not subject to the Poisonous and Deleterious Substances Control Law, but is regulated by the Pharmaceutical Affairs Law.

 

2 Importation of Poisonous and Deleterious Substances

(1) General Information

According to the Poisonous and Deleterious Substances Control Law, only companies registered as importers of poisonous¹⁰ and deleterious substances¹¹ may import poisonous and deleterious substances for the purpose of selling or giving them away (Article 3.2). This means that anyone who imports poisonous or deleterious substances for the purpose of transferring ownership to a third party, whether for a fee or free of charge, is required to register as an importer. 

Those who are not registered as importers are in violation of the above regulations unless they are importing for their own use or purpose.

 

(2) Import of poisonous or deleterious substances for the purpose of sale or award by a registered importer

For importation by a registered importer, a copy of the registration certificate for the importation of poisonous and deleterious substances is required.

When a person intends to import a poisonous or deleterious substance of an item other than a pre-registered item, he/she must obtain a change in the registration of the poisonous or deleterious substance (Article 9).

 

(3) Importation for purposes other than selling or giving away

(a) Import of ordinary poisonous and deleterious substances

In the case of importation for purposes other than sale or award, the issuance of an import confirmation certificate may be permitted in the following cases: ① for testing and research, ② for internal samples, ③ for personal use, ④ for personal use by medical personnel¹², ⑤ for re-imported or returned goods, and ⑥ for personal consumption¹³.

 

(b) Import of specified deleterious substances

With regard to specific poisons¹⁴, only researchers of specific poisons are allowed to import specific poisons.

 

(4) Sales and distribution

After importation, those who sell or give away deleterious or poisonous substances are required, in principle, to register as a distributor for each business office or store(Article 3.3)¹⁵. This means that importers have to wholesale to registered [distributors].

 

(5) Main duties of importers and distributors

Sellers and importers of poisonous and deleterious substances are required to appoint a person in charge¹⁶ of handling each business office or store where they are directly handled, and take charge of the prevention of harm(Article 7). A person in charge of handling poisonous and deleterious materials shall be appointed from among those who meet the qualification requirements of a pharmacist and a person who has passed the examination for handling poisonous and deleterious materials (Article 8).

In addition, sellers and importers are obligated to (1) take measures to prevent theft and loss of poisonous and deleterious substances (Article 11, Paragraph 1), (2) take measures to prevent dispersal and leakage (Article 11, Paragraph 2), (3) properly store poisonous and deleterious substances during transportation (Article 11, Paragraph 3 and Article 16), and (4) label poisonous and deleterious substances on containers and packaging (Article 12).

 

(6) Relationship with import approval under the Foreign Exchange and Foreign Trade Law

For poisons and deleterious substances, import approval is basically required.　 The items that require import approval are explained in another section, but the phrase “poisonous and deleterious substances” does not appear there, so it is difficult to understand that import approval is required, but depending on the type of poisonous and deleterious substances, they fall under the substances specified in the Chemical Substances Control Law (Approval of No. 2 and No. 2-2), the substances specified in the Montreal Protocol (Approval No. 2 and No. 3), and the substances specified in the Agricultural Chemicals Control Law (Approval No. 3). In the case of approval No. 3, import confirmation is sufficient, but an application for a certificate of confirmation of import of poisonous or deleterious substances is required, and the procedures related to the application are carried out in accordance with the Guidelines for Confirmation of Import of Poisonous and Deleterious Substances.

---

Please contact us if you have any questions.

¹See “Ministerial Ordinance Determining Cases Not Requiring Registration under Article 3, Paragraph (1) of the Agricultural Chemicals Control Act“.
² See Ministry of Agriculture, Forestry and Fisheries, “Handling at the time of import customs clearance of agricultural chemicals based on the Agricultural Chemicals Control Law,” 4(3).
3 The Minister of Agriculture, Forestry and Fisheries and the Minister of the Environment designate as specified pesticides those that do not pose a risk of harm to humans, livestock, or crops in light of their raw materials, and exclude them from registration. Currently, five types of pesticides are designated: baking soda, vinegar, natural enemies that live in the area, ethylene, and hypochlorite water (limited to that obtained by electrolysis of hydrochloric acid or potassium chloride solution).
⁴ It appears that the submission of documents for import verification is not required (see 4(3) of the Ministry of Agriculture, Forestry and Fisheries’ “Handling of Import Customs Clearance of Agricultural Chemicals under the Agricultural Chemicals Control Law”).
5 Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)
6 Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)
⁷ Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)
⁸ Excluding Class 2 Specified Chemical Substances.
⁹ Be sure to pay attention to the extension of the scope of poisonous and deleterious substances in accordance with the revision of the Cabinet Order on June 24, 2020.
¹⁰ The term “poison” refers to substances listed in Appended Table 1 of the Poisonous and Deleterious Substances Control Law, other than pharmaceuticals, quasi-pharmaceuticals, and in vitro diagnostic pharmaceuticals. For example, yellow phosphorus, sodium cyanide, mercury, arsenic, etc.
¹¹ The term “deleterious substances” means substances listed in Appended Table 2 of the Poisonous and Deleterious Substances Control Law, other than drugs, quasi-drugs, and in vitro diagnostic drugs. For example, ammonia, hydrogen chloride, carbon tetrachloride, sulfuric acid, etc.
¹² This refers to cases where there is an urgent need for treatment, no alternative products are available in Japan, and the medical personnel who imported the product intend to use it for the diagnosis or treatment of their own patients under their own responsibility. Cases in which veterinarians import products for the purpose of diagnosing or treating their own animals under their own responsibility are also treated in the same way.
¹³ This refers to cases where the product is used as a raw material for the company’s own products, or for the manufacture of the company’s own drugs, etc. for which approval, etc. has been obtained.
¹⁴The term “specified deleterious substances” refers to the deleterious substances listed in Appended Table 3 of the Poisonous and Deleterious Substances Control Law (and Article 3 of the Poisonous and Deleterious Substances Control Order). Octamethyl Pyrophosphoramide (also known as Schlardin), tetraalkyl lead, monofluoroacetic acid, etc.
¹⁵ However, if a registered importer or a registered manufacturer sells only to a registered manufacturer, a registered importer, or a registered distributor, registration as a distributor is not required.
¹⁶ Sellers who do not directly handle poisonous or deleterious substances, but only receive orders and make shipping arrangements (=ordered sellers), do not need to appoint a person in charge of handling poisonous or deleterious substances.

This article details Japanese regulations concerning the import of fertilizers and pesticides. If you would like more information or have any questions regarding these laws, feel free to contact us here.

 

Fertilizers

The import of fertilizers is regulated by the Fertilizer Control Law as shown in the following table.

General Fertilizer1	Ordinary fertilizer	・ Any person who intends to import ordinary fertilizers(except for specified matching fertilizer) in the course of business shall obtain registration(Article 4(3) of the Act) for each brand of such ordinary fertilizers if an official standard is specified, and shall obtain provisional registration (Article 5 of the Law) for ordinary fertilizers for which no official standard is specified. In this case, either (1) a “certificate of registration” or a copy thereof, (2) a “certificate of provisional registration” or a copy thereof, or (3) a “certificate” from the Director-General of the Consumption and Safety Bureau of the Ministry of Agriculture, Forestry and Fisheries to the effect that the fertilizer has been registered,　or a copy thereof, is required. ・A person who produces ordinary fertilizers for export to Japan as a business in a foreign country may obtain registration or provisional registration(Article 33-2 of the Law). In this case, a domestic administrator must be appointed (Paragraph 2 of the same article). In addition, certain matters must be reported. The documents required for imports are basically the same as those in (1) through (3) above.
	Specified matching fertilizer2	For Specified matching fertilizer, it is necessary to notify the name, etc. of the specified matching fertilizer at least two weeks prior to the start of the import business (Article 16-2 of the Law), and at the time of import, a “certificate” from the Director-General of the Consumption and Safety Bureau of the Ministry of Agriculture, Forestry and Fisheries to the effect that the company is an importer or a copy thereof is required.
Special Fertilizers3		A producer of special fertilizers or an importer of special fertilizers shall notify the prefectural governor having jurisdiction over the location of the place of business where the fertilizer is produced or imported at least two weeks prior to the commencement of the business (Article 22, Paragraph 2 of the Law). At the time of importation, a “certificate” or a copy thereof from the prefectural governor is required.

If the product is a poison, it is necessary to pay attention to the Poisonous and Deleterious Substances Control Law.

Pesticides

The import of pesticides is regulated by the Pesticides Control Law as shown in the following table.

Unregistered pesticides (excluding specified pesticides)	・Importers are required to obtain registration of pesticides. ・However, the importation of pesticides for experimental and research purposes or for use in pest control under the provisions of the Plant Quarantine Law may be carried out without registration4. In this case, it is necessary to submit a request for import of pesticides, obtain an “import confirmation” stamp, and submit and import request or a copy thereof to customs. ・In addition to importing unregistered pesticides, the sale and use of unregistered pesticides is basically prohibited (Articles 18 and 24 of the Law).   ※An application for registration may be made even by a foreign manufacturer (Article 34 of the Law). However, importers of pesticides registered by foreign manufacturers are required to notify the importer (Article 36 of the Law). In this case, the submission of a “Request for Importation (with an Import Confirmation Stamp)” may be substituted by checking the labeling on the container/packaging of the pesticide (Article 16 of the Law) at customs clearance5.
Specific pesticides6 (sodium bicarbonate, vinegar, natural enemies in the area, ethylene, hypochlorite water)	Importation is possible without registration of the pesticide7.
Registered pesticides	・When importing, it is necessary to submit or present to customs the original or a copy of the registration slip, or a copy of the registration slip that has been certified by the Agricultural Safety Control Division, Consumption and Safety Bureau, Ministry of Agriculture, Forestry and Fisheries, to the effect that it is consistent with the original8. ・In the case of having a third party import on your behalf, a power of attorney in the prescribed form is also required for customs clearance. ・Notification is required for those who purchase from importers and sell (Law 17). ・When handling pesticides that fall under the category of poisonous or deleterious substances, it is necessary to comply with the Poisonous and Deleterious Substances Control Law. ・In the case of handling pesticides that are designated as hazardous materials, the Fire Service Law must also be observed.
Active ingredients of pesticides (those listed on the import list of pesticides)	In addition to presenting the import list of pesticides, the applicant must submit a written statement to the effect that the bulk pesticide subject to the import declaration corresponds to the bulk pesticide listed on the list9. The Ministry of Agriculture, Forestry and Fisheries website is a good source of information on the import list of pesticides.
Active ingredients of pesticides (not listed on the import list of pesticides)	It is necessary to submit a notification form in the prescribed format in advance, obtain an import confirmation seal, and submit the said notification form at the time of customs clearance10.

If you would like to know more, the Ministry of Agriculture, Forestry and Fisheries website on “Import and Export of Pesticides” is a good reference.

¹ Ordinary fertilizers are those other than special fertilizers.
² The term “fertilizer” refers to ordinary fertilizers that are blended using only registered ordinary fertilizers as raw materials, as specified by the applicable government ordinance (see Article 4, Paragraph 1 of the same law).
³The term “special fertilizer” refers to rice bran, manure and other fertilizers designated by the Minister of Agriculture, Forestry and Fisheries (Article 2, Paragraph 2 of the said Law). The designation includes simple fertilizers such as rice bran, fish meal, coffee grounds and manure whose quality can be identified by farmers’ experience and five senses, as well as fertilizers such as compost whose quality is diverse and whose value does not depend only on the content of main ingredients, and therefore cannot be uniformly evaluated based only on the quantity of main ingredients.
⁴See “Ministerial Ordinance Determining Cases Not Requiring Registration under Article 3, Paragraph (1) of the Agricultural Chemicals Control Act“.
⁵ See Ministry of Agriculture, Forestry and Fisheries, “Handling at the time of import customs clearance of agricultural chemicals based on the Agricultural Chemicals Control Law,” 4(3).
⁶The Minister of Agriculture, Forestry and Fisheries and the Minister of the Environment designate as specified pesticides those that do not pose a risk of harm to humans, livestock, or crops in light of their raw materials, and exclude them from registration. Currently, five types of pesticides are designated: baking soda, vinegar, natural enemies that live in the area, ethylene, and hypochlorite water (limited to that obtained by electrolysis of hydrochloric acid or potassium chloride solution).
⁷ It appears that the submission of documents for import verification is not required (see 4(3) of the Ministry of Agriculture, Forestry and Fisheries’ “Handling of Import Customs Clearance of Agricultural Chemicals under the Agricultural Chemicals Control Law”).
⁸ Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)
⁹ Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)
¹⁰ Import and Export of Agricultural Chemicals” (Notification of the Director-General of the Production Bureau, Ministry of Agriculture, Forestry and Fisheries, No. 14 Production No. 9525, dated February 28, 2003)

---

Please contact us if you have any questions.

Importing fire-fighting machinery into Japan is regulated by the Fire Service Law.

Fire Service Law (fire alarms, fire pumps, fire hoses)

The Fire Service Law prohibits the sale, display for sale, and use in construction work in Japan of 12 items of fire-fighting machinery and equipment (“machinery and equipment subject to verification”): fire extinguishers, fire extinguishing agents for fire extinguishers, fire-extinguishing foam, fire detectors and transmitters, residential fire alarms, metal evacuation ladders, closed sprinkler heads, water-flow detectors, simultaneous release valves, repeaters, receivers, and slow descenders (Article 21-2, Paragraph 4 of the Law).

In addition, for certain fire extinguishing and other related equipment that does not fall under the above categories (“Machinery and equipment subject to voluntary labeling”), certain technical standards are established. Manufacturers and importers are required to inspect (Article 21-16-3 of the Fire Service Law) whether the equipment conforms to these standards. Further, equipment that conforms to the standards based on the inspection are allowed to be labeled as such (“Voluntary Labeling”) (Article 21-16-2 of the Fire Service Law).

In addition, importers are required to prepare and store inspection records, and to notify the Minister of Internal Affairs and Communications when they intend to attach a voluntary label (Article 21-16-4 of the Fire Service Law).

---

Please contact us if you have any questions.